cbr125 forum https://www.cbr125world.com/forum/ |
|
Turn signals https://www.cbr125world.com/forum/viewtopic.php?f=21&t=188 |
Page 1 of 1 |
Author: | Johnny hair [ Sat Jul 25, 2015 8:22 am ] |
Post subject: | Turn signals |
Hi what is the best method of shortening the front turn signals on a 07 |
Author: | mmiller [ Sat Jul 25, 2015 10:16 am ] |
Post subject: | Re: Turn signals |
I'm pretty picky - here's how I did mine.... I got some used rear signals and then removed the stalks from the fronts and replaced them with the shorter stalks from the used sets. I wanted to keep the bike as 'OE' as possible |
Author: | Johnny hair [ Sat Jul 25, 2015 12:27 pm ] |
Post subject: | Re: Turn signals |
That's what I thought when I saw your bike I know they were shortened but not lik with no stalks where they use the stalk screw and a washer to mount it lik you I am also finicky about originality I refuse to by the LEDs looks it's time to look for some used rear signals thx Ps I put back the snorkel the originality bug kick in I think it sounds better with it on also could use the practice to dismantle the top of the bike so I'm ready when the performance pack arrives lol |
Author: | mmiller [ Sat Jul 25, 2015 3:07 pm ] |
Post subject: | Re: Turn signals |
Yeah, I just prefer to do it properly. The good news is that rear signals tend to survive accidents so they are out there. The bad news is, they can still be a bit tough to find. I'm not a big fan of LED's - The stock signals are very easy to see. I knew when I shortened them it would reduce visibility so I went with a method that kept a measure of safety and the OE reliability. I've seen some pretty weird LED installs where you can't even see them. To me, that's dangerous. |
Author: | mapleleaf111 [ Fri Mar 11, 2016 10:45 am ] |
Post subject: | Re: Turn signals |
It's been many years since I modified my stock front turn signals. Basically, they are in two pieces. I unscrewed them and took off one of the removable lengths and reattached to the shorter piece left over. Here is a short video on how to do it. Very easy and the results look great :) phpBB [media] |
Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |