cbr125 forum

Well, there are LOTS of things one can do to this (and others of course) bike. I've spent the better part of this past winter modifying my bike with both performance mods (the Performance Pack, removing the Snorkel, replacing the stock horn, etc.) as well as non-performance related mods. Most are contained in my “Signature”.

I’ll try and post up some picks of what all I’ve done since I got her and a list of what all has been done!

Cheers!!

OK, here are some of the things/bling that I've added to my bike since I got her last year...

After this past week of rain, she needed a bath so I gave her a good one this morning!


Here is a set of Billet Aluminum Crankshaft covers. I've "chewed up" the top one a bit, but is still OK


This pic shows the red reflective strips I have on both the rear and front tires as well as the holding strap for my side saddles.


This shows my front tire with the same strips as well as my Aircraft grade Billet Aluminum Valve Stem w/pressure sensor (it turns red when REALLY low, yellow when a bit low).


I got this from a fellow member from the other site as he was clearing out items after his crash. It needed a new velcro strap and some other repairs to the strap attachment points. This has come in handy MANY times already!


This just shows the adjuster plates that I painted red and my new Pirelli tire!


This is a pic of my Stash Box. This hold a few items including a pressure tester, spare fuses, small bungee cords and a pad of paper and pen, etc.


Here is my 15 LED Turn Signals! VERY bright!!


Another look at the Valve Stem and pressure sensor.


Here is my front LED turn signal mirror! You can also see here one of my Aluminium adjustable levers with anti-vibration sleeve as well as my "Cruise Controller".


Here is what I put in the place of the front Turn Signal stalks... Also very bright! Of note, they fit PERFECTLY in the spot where the old Turn Signal stalks were!!! They are wired in with the LED Mirrors.


Here you can see my Clock/Temperature and Volt Meter as well as my Front Shock adjusters!


Here you can see my front Shock Adjuster as well as my remote controller for my Parrot SK4000 (FM radio as well as a blue tooth for my cell) and my 12/5 volt adapters. The patch of velcro is for my garage door mini key chain remote.


Here you see my adjustable brake (and clutch) levers with a anti-vibration sleeves. The other device is my Speed Control (Cruise Control).

Well, that's it for now! Please post your pics of what you've done to your bike!!

Cheers!!!!

Here's an overview of some of the mods I've done since acquiring the bike....



2008 CBR 125r (Stock Bore/Stroke)

• Performance Pack
• CRG Lanesplitter Bar End Mirrors
• Tail Tidy
• Custom Gear Position Indicator
• Metzeler Sportec Interac M5 Radials
• Custom Suspension Setup
• Stainless Steel Braided Brake Lines
• Yoshimura Stainless Steel Exhaust

And much more....once the bike is complete I'll do a proper, in-depth write-up on it and create a .PDF datasheet to show all the re-engineering that has gone into it.

On the Dyno...

_________________
Best & Thanks!
Marvin Miller
cbr125world Store

...because every day is MotoGP day when you own a CBR 125r...

where you get the turn signals from and crank covers

I made mine look like this not fixed my mirror mount im to lazy to change it lol